Dolmar AT3726A Manual De Instrucciones página 14

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Handle type
No load speed
(at each rotation speed level)
Overall length
(without cutting tool)
Nylon cord diameter
Applicable cutting tool and
cutting diameter
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Battery adapter
Cord connected battery pack
Portable power pack
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
Cutter blade
Plastic blade (305 mm)
Nylon cutting head
Plastic blade (255 mm)
2-tooth blade
(P/N 198345-9)
3-tooth blade
(P/N 195299-1)
4-tooth blade
(P/N 196895-8)
Nylon cutting head
(P/N 197993-1 / 191D90-9)
Plastic blade
(P/N 198383-1)
(P/N 199868-0)
AT3726A
Bike handle
5.9 - 6.5 kg
BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH / DC18WC / LG-184 / LG-184 X2
14 ENGLISH
AT3726L
Loop handle
-1
3: 0 - 7,000 min
-1
2: 0 - 5,500 min
-1
1: 0 - 4,600 min
-1
3: 0 - 5,500 min
-1
2: 0 - 5,000 min
-1
1: 0 - 4,600 min
1,846 mm
2.4 mm
255 mm
255 mm
255 mm
430 mm
255 mm
305 mm
D.C. 36 V
5.7 - 6.3 kg
BAP182
BL36120A
PDC01 / PDC1200