Idiomas disponibles
Idiomas disponibles
POLLUTION SENSORS
The particles sensor and gas sensor need to be cleaned regularly (every 2 months) and appropria-
tely.
Make sure you turn off and unplug the appliance before cleaning the pollution sensors and follow the
recommendations below:
1. Clean the air inlet and outlet using a soft brush or cloth.
2. Open the sensor cover located on the right-hand side of the appliance.
3. Lightly wet a cotton swab and remove any dust from the lens and the inlet/outlet. Wipe using
a dry cotton swab.
4. Clean the gas sensor using a soft brush or vacuum cleaner.
2
1
IMPORTANT:
• Never use a detergent or metal object to clean the sensors.
• The efficiency of the sensors may be reduced if not cleaned regularly.
• Cleaning frequency varies depending on the operating environment of the appliance. If it is
used in a dusty environment, clean the sensors more frequently.
STORAGE
When you are not using the appliance, store it in a cool, dry place.
20
3
4
IN THE EVENT OF A PROBLEM
• Never dismantle your appliance yourself. A poorly repaired appliance can cause risks for the user.
• Check the troubleshooting table below before contacting an approved Service Center:
Problem
Check
Is the power cord connected?
Are all the display elements off?
The appliance will not
switch on.
Is there a power outage?
Is the front door closed?
The air flow does not
Is the appliance in silent or
change automatically.
boost mode?
The flow is a lot weaker
Does the filter need to be
than before.
cleaned or replaced?
There is an unpleasant
Does the filter need to be
smell coming from the
cleaned or replaced?
air outlet.
Is the sensor lens covered with
dust?
The air quality light
Does the light still indicate poor
does not change color.
air quality?
Does the light still indicate ex-
cellent air quality?
WARRANTY
Contact an approved Service Center if:
• your appliance has been dropped
• your appliance or its power cord is damaged
• your appliance is not working properly
ENVIRONMENT PROTECTION FIRST!
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
Solution
EN
FR
Connect the power cord to a plug
with the correct voltage.
Press the start button and select the
required function.
You can use your purifier once the
power turns on again.
Close the front door properly.
Select the correct operating mode
AutoDay or Auto Night.
Check the filter cleaning and replace-
ment frequencies and clean/replace
the filter(s) if necessary.
Check the filter cleaning and replace-
ment frequencies and clean/replace
the filter(s) if necessary.
Clean the sensor lens.
Set the sensor sensitivity to «low» or
«medium».
Set the sensor sensitivity to "high"
or "medium".
21
