Idiomas disponibles
Idiomas disponibles
3 Temperature and time display
A. The left screen shows the temperature, for the current real-time temperature, accurate to 1 decimal
point, collected every 1 second, can be set up to 95 ℃, the working state is often bright, set flashing,
reserved can be converted to Fahrenheit.
B. When the temperature reaches the set number, the buzzer rings 3 times (one short and one long), this
reminder that you can put food into the machine.
4 The end-of-work status
The countdown ends with the 5 long buzzer, and every 1 minute 5 long rings until the off key is pressed,
the temperature shows the current temperature, and the setting temperature does not blink (show setting
temperature 2s, show current temperature 10s). After 1 hour in this state of maintenance, automatically
shut down or artificially press the key shutdown when no button is pressed.
5 The temperature setting
Press and hold the settings key, enter the setting state, the temperature screen flashes, press the up and
down keys can adjust the temperature value, press the "twice", adjust the plus or - 0.1 ℃, long press can
accelerate the adjustment, the longer you press, the faster the acceleration adjustment. If no keys are
pressed within 5 seconds, automatically enter the settings confirmation save and enter the working state.
6 Time setting
After setting the temperature, then press the setting key short, the hour HH double-digit flashing time
screen, can set the hour, the hour setting range 01 to 99, (can be 99-01 reverse adjustment), and then
short (2nd) press the setting key, the minute MM double-digit flashing, can set the minute, minute setting
range: 01 to 59, (can be 59 to 01 reverse adjustment), set accurate to 1 minute, short press "ting" a bit,
adjust "plus/ - " 1 minute / hour, long press can accelerate adjustment, the longer the press, the faster the
acceleration of adjustment. After the setup is complete, press the settings key for the 3rd time to confirm
the settings save, (or when there is no "twice" button signal and then flash for 5 seconds, also
automatically default to the time setting save confirmation), into the working state.
7 Menu settings
Short press to set the menu button M1 to M6, corresponding to the menu button flashing, temperature
and time flashing to show the last saved data, at this time press and hold the settings button, into the
settings state, (short press is to confirm the menu, start work), after the setup is complete, press the
settings button to confirm the preservation of this menu set.
Menu factory default value, M1: 95C/01:00, M2: 85C/01:30, M3: 75C/03:00,M4: 65℃/ 01 ： 30， M5: 60℃/
03 ： 30， M6: 50℃/ 06 ： 00
Product Features:
Model: BMP-25
Voltage: 220~240V/50Hz
Power (KW): 1.2
Product Dimension (mm): 626*360*300
Gross Weight (kg): 14
3/5
