Teka GFG2 INOX Manual Del Usuario página 14

• Do not allow grease to accumulate in any part of the extractor,
especially in the grease filters as this COULD PRODUCE A FIRE
RISK!
• The grease filters and the internal part of the extractor must be
cleaned at least once a month depending on how often the
extractor is used. Note that grease is deposited in the extractor
when cooking, whether it is switched on or not.
• We recommend the use of gloves and caution when cleaning the
inside of the extractor.
Repairs
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
• Do not switch on the extractor if the supply cord is worn or has
cuts or if there are signs of deterioration around the control
panel.
• If the LED module is malfunctioning, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
• If the extractor stops working or functions abnormally, unplug it
from the mains and contact the technical service.
•
Please contact the nearest Qualified Technical Assistance
Service for any repairs always using original spare parts. Repairs
and modifications carried out by others could damage the
extractor or cause it to malfunction and cause safety risks.
A Motor controls, three speeds:
Low
High
Intensive
B Light switch independent from motor
commands
C Lighting by means of LED lamp
14
-
D Filter located over cooking area, easily
withdrawn for cleaning
E Frame and filter support
F Possibility of incorporating activated
charcoal filter (fig.2)
G-H Anti return tabs to be located in the
outlet mouth, locating their ends in the
holes provided (fig.2).