Idiomas disponibles
Idiomas disponibles
Mounting the saw blade
WARNING – Disconnect the machine from pneumatic supply before mounting the saw
blade.
Observe the following for mounting the required saw blade to the saw:
-
Loosen socket head screw item A (see fig. 3),
-
insert the saw blade item C to its stop,
-
securely tighten the socket head screw item A (see fig. 4).
Notice: The centre pin item B is not designed to hold the saw blade. This function is
performed by the clamping action of the socket head screw item A. Replace the screw, if it
cannot be securely tightened any more.
Do not lubricate the blade clamp.
Important– Before cutting an assembly, make sure that no electric lines of this assembly are
damaged or cut. If they are energized, there is danger to life due to electrocution.
-
Follow all safety precautions.
-
Install the correct saw blade, see „Mounting the saw blade".
-
Connect the machine to the air supply (blow out the hose before connecting).
-
Actuate the air supply.
-
Actuate the valve (ref. to fig. 5).
-
Start cutting.
-
Cool sufficiently the saw blade. Useful tips: refer to fig
36
Fig.3
Fig.4
