Idiomas disponibles
Idiomas disponibles
WHERE TO INSTALL THE APPLIANCE
Place the purifier on a flat, stable surface in the room requiring treatment.
To allow the air to circulate freely, avoid placing the appliance behind curtains, below a window,
item, furniture, or shelf unit, or close to any other obstacle, and leave at least 60 cm of free space
on each side of the appliance.
BEFORE USING THE APPLIANCE FOR THE FIRST TIME
Make sure that the plastic packaging protecting the filters has been removed before using the appliance.
Before the first use, ensure the voltage, frequency and power of your appliance suit your electric supply.
Your appliance can operate using an unearthed plug. EPS is a class II (double electrical insulation).
Before switching on your appliance, ensure that:
- the appliance is completely assembled as described in the safety instructions,
- the appliance is placed on a stable, horizontal surface,
- the appliance is positioned in accordance with the instructions given in this manual,
- the air inlets and the oultet grid are completely unobstructed,
- the filters and panel have been correctly installed (See section ''Disassembling / Reassembling filter'')
IMPORTANT: You are advised to switch off and unplug the appliance when not in use.
HOW TO CONNECT YOUR PURIFIER TO INTERNET
Download the app «Pure Air By Rowenta» & follow the instructions on your smartphone :
1. Sign in to create your Rowenta account if you are new. Or log in the app if you already have an
account.
2. Make sure to stand close to the purifier during the pairing (2 meters maximum) and make sure
the purifier is located near a strong Wi-Fi signal.
3. Make sure your phone is connected to your local Wi-Fi network.
4. Turn your purifier on & hold the Wi-Fi button for 3 seconds (you'll hear a «ding» sound and the
Wi-Fi indicator will flash to indicate that your purifier is successfully connected to Wi-Fi.)
5. Choose your Wi-Fi network and enter the network password to connect to your local Wi-Fi
network.
6. And you're done !
The Wi-Fi indicator lights to indicate that your purifier is successfully connected to your Pure
Air app.
Wi-fi function
To launch a new pairing press the WIFI button
• When the light is on, the product is paired/connected.
• When the light is flashing quickly then slowly, the product is pairing/connecting to the WIFI/
servers.
• When the light is off, the product is not connected.
8
for 3 seconds.
Connection issues
In case of pairing issues between the appliance and your domestic Wi-Fi network, refer to the
information listed on the following link:
https://www.compatibility.groupeseb.com/CompatibilityList-Pureair-Rowenta.pdf
OPERATION
In order to achieve the best purification effect, four sides of the purifier should be more than 60cm
away from the wall for the first time.
Power « Start/Stop (1) »
– Press this button to turn the air purifier on/off.
« Speed selection (2) »
– You can choose manually the purification speed from speed 1 to Speed 6.
« Auto day mode button (4) »
– The purification speed is set to speed 2, speed 4 or speed 5 according to air quality level.
– If the air quality level is excellent then the device does not run.
« Auto Night Mode (5) »
– The purification speed is set to speed 1, speed 2 or speed 3 according to air quality level.
– If the air quality level is excellent then the device does not run.
« Child lock (3) »
– The lock system prevents the purifier from being accidentally mis-set during operation.
– To activate it, press the button (3) for 3 sec until the locked control panel indicator turns on.
To exit this mode, press the button (3) again for 3 seconds, until the indicator turns off.
When selected, the other buttons are locked.
• Indication of air quality
Air quality indicator is the light cercle around start/ stop button. Air quality indicator (7) is located
at the « Control panel (A) » of the appliance. The LED will indicate the air quality level:
Air Quality
Excellent
Slight pollution
Moderate pollution
High pollution
CARE & MAINTENANCE
Before performing any maintenance work, always switch off the air purifier using the « start/ stop button
(1) » and unplug it. Use a damp cloth to clean the surface of the product.
Important: Do not use any abrasive materials, as these may damage the surface of the product.
Air quality level color
Blue
Green
Yellow
Red
EN
9
