Roborock Empty Wash Fill Dock Manual Del Usuario página 13

Idiomas disponibles

Idiomas disponibles

Routine Maintenance
Frequency
To ensure optimal performance of the dock, refer to the following
table for routine maintenance:
Parts
Clean Frequency
Water Filter
Clean as needed
Clean Water Tank and
Clean as needed
Dirty Water Tank
High-Speed Maintenance
Clean as needed
Brush
Disposable Dust Bag
Dock Charging Contacts,
Location Beacon, and
Clean every month
Robot Body
Note: The frequency of replacement may vary depending on the situation. If
abnormal wear occurs, replace the parts immediately.
Replacement
Frequency
/
/
Every 6-12 months
/
Every 1-2 months
/
Routine Maintenance
Moving the Dock
Remove the water tanks and the dustbin before moving the dock.
Grip the handle on the back with one hand and the inner side of
the front, as shown. Do not grip the base because as it is not
designed for lifting.
Water Tank
Clean the dirty water tank as needed. Open the dirty water tank
lid and pour out the dirty water. Fill the tank with clean water,
close the lid, lock it, and shake. Pour out the dirty water. Close the
lid and then re-install.
14
loading

Productos relacionados para Roborock Empty Wash Fill Dock