Assembly
Handle deployment
• Loosen the four knobs of the handle to allow the
extensions move freely.
• Pull the handle up and back to set it in the operating
position. Double-check the extensions are fixed safely in
place.
• Tighten the four knobs and block the upper extension
setting down both blocking levers.
Handle
Switch
bar
Handle
extension
Handle
block
levers
Side floodgate
• Loosen the side floodgate knob (E).
• Open the floodgate and tighten the knob to let the grass trimmings be expelled though the open side floodgate.
• To close the floodgate, loosen the knob and allow the floodgate going back to its original position.
CAUTION
• Before using the side floodgate double-check the shredding cap is in place (See page 8).
1
2
3
E
Grass trimmings collecting bag assembly
• Raise the rear floodgate (A).
• Having the rear floodgate up fit the collecting bag (B)
into the floodgate axis sides (C).
CAUTION
• Before assembling the grass trimmings
collecting bag remove the shredding cap (See page 8).
B
C
B
A
Side view
Upper view
ENGLISH
7
