Qlima LK 2100 TOUCH Instrucciones De Uso página 45

man_LK2100 TOUCH ('20) V4.indd 45 man_LK2100 TOUCH ('20) V4.indd 45
If you fail to consult and/or follow up the
rules, instructions and explanation, the
warranty will no longer be valid, and the
manufacturer will no longer deal with
any damage to the appliance and/or your
environment under the warranty.
OPERATION GUIDE
1. Take the unit of the carton and place it on the floor.
2. Assemble the casters without brake on the front and the casters with brake
on the back.
3. Add water to the water tank by these steps:
3.1 Make sure the power cord is disconnected, then draw out the water
tank. The water level must be between the MIN and MAX lines.
3.2 After some time of operation dust and dirt may occur in the water tank.
It is highly recommended to change the water and clean the water tank
frequently.
3.3 If the machine is used to cool the room and the water tank does not con-
tain enough water, a warning alarm will sound, the signal light flickers
and the water pump will automatically stop working after 3 seconds.
After refilling the water tank, the light turns off. You can now restart
the cooling function.
4. Plug in the power cord, a short beep will be heard and the cooler is in standby
state.
5. Unplug the power cord if you want to move the cooler to a different position.
front casters front casters
back casters back casters
4
45
07-08-20 09:25 07-08-20 09:25