Idiomas disponibles
Idiomas disponibles
Product Layout
HM65X
Palm Microphone
You can request your dealer to program the Top Key (TK), P1
key, and P2 key as shortcuts to assignable radio features.
Installation
Precautions
Before installation, read the following guidelines carefully:
●
Before installation, ensure that the vehicle power supply
has a negative ground with the voltage of 13.6±15% V.
Before installation, measure the length of screws
●
protruding from the radio surface. During installation,
drill the holes on the vehicle according to the screw
length to avoid damaging the vehicle wires or other
components.
Use the antenna and power cord approved by the
●
Company.
●
Use the mounting bracket approved by the Company.
Otherwise, the accidental drop of the radio may injure
people in the vehicle.
●
Install the radio at a position where you can easily reach
the front panel.
To facilitate wiring, keep sufficient space at the back of
●
the radio.
●
When replacing the fuse for the DC power cord, ensure
the new fuse shares the same specification with the old
one.
If any other communication devices such as repeaters
●
are in the vicinity of the radio, keep the antenna of these
devices at least 10 meters away from that of the radio.
Tools
●
electric drill
●
Phillips screwdriver
●
T20 torx screwdriver
1
Parts
No.
Part Name
No. Part Name
Self-tapping Screw
1
Radio
6
(4 mm x 16 mm)
2
Locking Knobs
7
Microphone Hanger
Mounting Bracket
GNSS Antenna
3
8
Self-tapping Screw
Power Cord (with fuse)
4
9
(4.8 mm x 20 mm)
5
Palm Microphone
10 RF Antenna
