Hama DIR1570CBT Instrucciones Breves página 5

1. Explanation of warning symbols and notes
Risk of electric shock
This symbol indicates a risk of electric shock from
touching uninsulated product parts that may carry
hazardous voltage.
Warning
This symbol is used to indicate safety instructions or to
draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package contents
• DIR1570CBT Digital/Internet Radio with CD
• These operating instructions
3. Safety instructions
• The product is intended for private, non-commercial use
only.
• Do not use the product in areas in which electronic
products are not permitted.
• Protect the product from dirt, moisture and overheating
and use it in dry rooms only.
• As with all electrical products, this device should be kept
out of the reach of children.
• Do not drop the product and do not expose it to any
major shocks.
• Do not operate the product outside the power limits given
in the specifications.
• Keep the packaging material out of the reach of children
due to the risk of suffocation.
• Dispose of packaging material immediately in accordance
with the locally applicable regulations.
• Do not modify the device in any way. Doing so voids the
warranty.
• Use the product only for the intended purpose.
• Do not use the product in the immediate vicinity of
heaters, other heat sources or in direct sunlight.
• Do not use the product in a damp environment and avoid
splashing water.
• Only use the article under moderate climatic conditions.
• The product is intended only for use inside buildings.
• The product must only be operated on a supply network
as described on the type plate.
• Route all cables so there is no risk of tripping.
• Do not bend or crush the cable.
• Always pull directly on the plug when disconnecting the
cable, never on the cable itself.
Warning - laser
• Do not look directly at the laser beam! Close your eyes
and turn your head away if your eyes meet the laser
beam.
• Do not look directly at the laser beam using optical
instruments!
• This product contains a class 1 laser for consumers
compliant with EN50689:2021.
Risk of electric shock
• Do not open the device or continue to operate it if it
becomes damaged.
• Do not use the product if the AC adapter, the adapter
cable or the mains cable are damaged.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to qualified
experts.
4. Before commissioning
Note
A detailed description of the
UNDOK app and all of its
functions can be found in our
UNDOK guide at:
www.hama.com - > 00054253 - > Downloads
Setting up a network connection
WLAN (wireless network)
• Ensure the router is switched on, is functioning correctly
and that there is a connection to the Internet.
• Activate your router's WLAN function.
• To ensure the correct functioning of your WLAN
connection, follow your router's operating instructions.
• Then proceed as described under point 5, "Getting
started".
5. Commissioning
Note - optimising reception
• Please note:Always pull the antenna out completely.We
recommend you adjust the antenna vertically to ensure
optimal reception.
3