Problem
Possible cause
The motor runs
The chain is blunt.
and the chain ro-
tates, but the chain
does not cut.
The chain is in the
incorrect direction.
The chain is tight
or loose.
The machine does
not start.
The chain brake is
engaged.
The machine and
battery are not
connected correct-
ly.
The battery level
is low.
The lock out but-
ton and the trigger
are not pushed at
the same time.
The battery is too
hot or too cold.
The motor runs,
The machine is in
but the chain does
the protection
not cut correctly,
mode to protect
or the motor stops
the PCB.
after around 3 sec-
onds.
The battery is not
charged.
The chain is not
lubricated.
Incorrect battery
storage tempera-
ture
English
8
Solution
Sharpen or replace
Voltage
the saw chain.
No load speed
Turn the chain
loop to the other
Guide bar length
direction.
Chain stop
Adjust the chain
Chain oil capacity
tension.
Weight (without battery
Pull the chain
pack)
brake in the direc-
tion of the user to
Measured sound pressure
disengage it.
level
Make sure that the
Guaranteed sound power
battery release
level
button clicks when
Vibration
you install the bat-
tery pack.
Chain
Charge the battery
Guide bar
pack.
Battery model
1. Push the lock-
out button and
hold it.
Charger model
2. Push the trig-
ger to start the
IPX
machine.
9
Refer to battery
and charger man-
ual.
Name and address of the manufacturer:
Release the trigger
and start the ma-
Name:
chine again. Do
not force the ma-
chine to cut.
Address:
Charge the battery.
Refer to the bat-
Name and address of the person authorised to compile the
tery and charger
technical file:
manual for correct
charging proce-
Name:
dures.
Address:
Lubricate the
chain to decrease
Herewith we declare that the product
the friction. Do
not let the guide
Category:
bar and the chain
Model:
operate without
sufficient lubri-
Serial number:
cant.
Year of Construction:
Cool the battery
pack until it de-
•
creases to the am-
bient temperature.
•
9
TECHNICAL DATA
82 V DC
25 m/s
356 mm
< 0.2 s
200 ml
3.65 kg
L
dB(A)
L
3.3 m/s
90PX052X
144MLEA041(554557)
82V180, 82V290P, 82V360,
82V580P and other BAB ser-
ies
82C6 and other CAB series
IPX4
EC DECLARATION OF
CONFORMITY
GLOBGRO AB
Globe Group Europe
Riggaregatan 53, 211 13 Malmö, Sweden
Micael Johansson
Riggaregatan 53, 211 13 Malmö, Sweden
Chainsaw
82CS24(CSB404)
See product rating label
See product rating label
is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
is in conformity with the provisions of the following
other EC-Directives:
= 92 dB(A), K
= 3
pA
pA
= 106 dB(A)
wA.d
2
2
, K = 1.5 m/s
EN