Idiomas disponibles
Idiomas disponibles
2. Enable the Bluetooth function in your phone and search for nearby
Bluetooth devices.
3. After the speaker (PNI-BT600) has been identified, confirm the
association.
4. After successfully pairing the two devices, you can start playing music on
the portable speaker.
Change playback source
Long press the key [3] to change the playback source in the following order:
Bluetooth-micro SD card-USB-AUX. The transition from one source to
another will be confirmed by a sound.
Note: the last connected device has the priority.
LED indicator
The white LED blinks quickly: the device is in pairing mode.
White LED on: Bluetooth connection established.
The white LED blinks slowly: playing music in progress.
Battery level indicator
Charging in progress: the LEDs light up alternately from left to right.
Battery charged 25%: LED 1 is on, and LEDs 2, 3 and 4 are blinking.
Battery charged 50%: LEDs 1 and 2 are on, and LEDs 3 and 4 are blinking.
Battery charged 75%: LEDs 1, 2 and 3 are on, and LED 4 is blinking.
100% charged battery: all LEDs are on.
To charge the built-in battery, insert the USB cable included in the package
into the USB-C port on the speaker.
Overload protection. The battery is fully charged after approximately 4 hours
and has an autonomy of 6-8 hours depending on the volume level.
Overdischarge protection: When the battery level drops below 3.4V, the
5
User manual
