Idiomas disponibles
Idiomas disponibles
TOOLS
1 Dual-Disc adaptor
2 Small taper adaptor
3 Large taper adaptor
4 Spindle guide, 55 mm
5 Spindle guide, 150 mm
6 Spindle guide, 200 mm
7 Extension, 26 mm
8 Pilot bearing adaptor, 10 mm
9 Pilot bearing adaptor, 12 mm
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third-parties.
INTENDED USE
The centring tool is suitable for clutch disc hubs with 10 to 30 mm Ø and enables precise centring of
the clutch disc on vehicles with or without guide bearings. On vehicles without guide bearings, the
alignment of the friction disc is carried out on the friction surface of the clutch pressure plate.
SAFETY INFORMATIONS
Keep children and unauthorised persons away from the work area.
•
Do not let any children play with this tool or its packaging.
•
•
Make sure that the work area is sufficiently illuminated.
Keep the work area clean, organised, dry and free from other materials.
•
Do allow untrained persons work with this tool set.
•
•
Always work according to the specifications of the vehicle manufacturer. These instructions
serve exclusively for illustrating the product and never replace the service literature.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Clutch Aligning Tool Set
8
9
11
10
12
3
2
Tel.: 02196 720480
Fax.: 02196 7204820
13
14
15
16
6
7
5
4
10 Pilot bearing adaptor, 14 mm
11 Pilot bearing adaptor, 15 mm
12 Pilot bearing adaptor, 16 mm
13 Pilot bearing adaptor, 17 mm
14 Pilot bearing adaptor, 19 mm
15 Pilot bearing adaptor, 25 mm
16 Pilot bearing adaptor, 27 mm
17 Pilot bearing adaptor, 30 mm
www.bgstechnic.com
BGS 8760
17
1
© BGS technic KG, Copying and further use not allowed
