Sonus Faber ASTER Manual Del Propietário página 12

• Do not connect the loudspeakers parallel to each other or directly to a constant voltage sound distribution
system (100 V, 70.7 V or similar). This could result in a serious system overload, with possible damage to
the loudspeaker and/or the amplifier.
• Do not place audio cables and electrical power cables in close proximity to one another. An electromagnetic
field is present in the vicinity of the power cables, which can cause an unpleasant humming noise. If this
should occur, move the audio cables and electrical power cables away from each other.
• The connections must be made with the equipment turned off. Pay attention to the polarities of the
terminals during connection.
3 INSTALLATION
3.1 PACKAGE CONTENT
• Speakers
• Wall-mounting bracket
• User manual
3.2 INSTALLATION PROCEDURE
3.2.1 Extract the cables from the wall, after having first positioned them in the desired place.
3.2.2 Pass the cables through the circular hole present in the wall-mounting bracket. Now, tighten the bracket to
the wall. Use any one of the four planar surfaces of the wall-mounting bracket to position and fasten it correctly.
The use of a spirit level or similar tool is advised.
11 11
EN IT