EGO PH1420E Manual De Instrucciones página 6

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
Maintain power tools and accessories. Check for
EN
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect
the power tool's operation. If damaged, have the
power tool repaired before use. Many accidents are
caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
This 56V power head PH1420E may be used with
only the following EGO attachments or subsequently
introduced by EGO for use with this power head:
ATTACHMENT TYPE
Line Trimmer
Brush Cutter
Hedge Trimmer
Hedge Trimmer
Pole Saw
Line Trimmer
Edger
Cultivator
Bristle Brush
Snow Shovel
Olive Shaker
Rotocut
BATTERY TOOL USE AND CARE
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects that can
make a connection from one terminal to another.
6
56 VOLT MULTI TOOL POWER HEAD — PH1420E
SERVICE
MODEL NUMBER
STA1600
BCA1220
HTA2000
HTA2000S
PSA1000
STA1500
EA0800
CTA9500
SAVE THESE INSTRUCTIONS
BBA2100
ADDITIONAL SPECIFIC SAFETY RULES CAN BE
SSA1200
FOUND IN THE APPLICABLE ATTACHMENT'S
OSA1000
OPERATOR'S MANUAL
RTA2300
SPECIFICATIONS
Voltage
Weight (Without battery pack)
PACKING LIST (FIG. A)
Shorting the battery terminals together may cause
burns or a fire.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged
or modified. Damaged or modified batteries may
exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
o
temperature above 130
C may cause explosion.
Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified
range may damage the battery and increase the risk
of fire.
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
If situations occur that are not covered in this manual,
use care and good judgment. Contact the EGO Service
Center for assistance.
56 V
2.9 kg
loading