Idiomas disponibles
Idiomas disponibles
PULMIC PEGASUS 75
MOTOR & PUMP
The motor, the pump and the pressure switch
are sensitive items subject to wear, they are
integrated into a single module and need
preventive maintenance to extend their useful life.
To keep the pump head in proper operating
condition after each application, run the sprayer
with clean water in open circuit for a few minutes.
Never leave the pump with chemical products inside for more than 8
hours, as these products may precipitate or agglutinate, causing blockages
and malfunctioning of the pump. In addition, if these products contain
considerable concentrations of organic solvents or solvents, they will damage
the internal elements of the pump.
Do not use any corrosive acid, and if you do so by accident, immediately
clean the tank and clean the circuit with clean water in open circuit circulating
it for some time.
To preserve the motor, do not immerse the trolley in any type of liquid and
protect it from humidity as far as possible. This motor is a DC brushed motor,
its wear and life will depend exclusively on the above mentioned, the ambient
temperature and the average working pressure.
Watch the product maintenance video through the following link
or QR:
www.tiny.cc/maintenance-peg75
— 14 —
www.gruposanz.es
