Allen + Roth ARFPDF32F1 Manual Del Usuario página 14

HEATER CLEARANCES
For convenience and efficiency, install the heater with these points in mind:
• Provide easy access for operation, inspection and service.
• Install the heater in the coldest part of the room.
If this heater is installed directly on carpeting, tile, or other combustible material, other than wood flooring,
the heater must be installed on a metal or wood panel that extends the heater's full width and depth.
CAUTION
Clearances to Combustibles:
Carefully follow the instructions below. This fireplace is designed to set on the floor using the support legs.
WARNING
Fig. 3— Clearances as Viewed from the Front of the Heater (Inches)
*Left / Right
6 in.
Top clearance is from the top of the heater to the ceiling, wood shelf, or other combustible material.
Bottom clearance is from the bottom of the heater to the surface of carpet, tile, or other combustible material.
Always maintain a minimum of 36 in. clearance from furniture and draperies.
Installation (cont.)
If you install the heater in a home garage, a.) ensure the heater pilot and burner are at
least 18" above the floor and, b.) locate the heater where moving vehicles will not hit it.
Maintain the minimum clearances shown in (see Fig. 3). If you can, provide greater
clearances from floor, ceiling and joining wall.
6"
Minimum Clearance to Combustibles
Top
36 in.
36" Min.
6"
Bottom
0 in.
14
Vent-Free Gas Fireplace User's Manual
Front
36 in.
Rear
0 in.