Declaration Of Conformity - Beta 1498BC/12 Manual De Uso E Instrucciones

EN
OPERATION MANUAL AND INSTRUCTIONS
After use, store the starter in a dry, moisture free place. Use a dry cloth to clean the starter's casing.
USE OF THE LED LIGHT
The starter has a LED light with three positions that can be selected in sequence:
1. Press the start button for three seconds to switch on the normal light.
2. Press the start button again for the rotating flashing light.
3. Press the start button again for the SOS light.
4. Press the start button again to switch off.
MAINTENANCE
Maintenance and repair jobs must be carried out by trained personnel. For such jobs, you can contact Beta Untensili S.P.A.'s
repair centre.
DISPOSAL
The crossed-out wheelie bin symbol on the equipment or packaging means that the product should be collected separately from
other types of urban waste at the end of its useful life.
Any user who is going to dispose of this tool can:
- deliver it to an appropriate collection facility for electronic or electrotechnical equipment;
- return it to the dealer upon purchase of a new, equivalent item of equipment;
- in case of a product for professional use only, contact the manufacturer which will arrange for the product to be properly
disposed of.
Proper disposal of this product allows the raw materials contained in it to be reused and prevents da- mage to the environment
or human health.
Illegal disposal of this product is a violation of the provision concerning the disposal of hazardous waste and will give way to the
application of such fines as provided for under current regulations.
WARRANTY
This tool is manufactured and tested in accordance with current EU regulations. It is covered by a 12-month warranty for
professional use or a 24-month warranty for nonprofessional use.
We will repair any breakdowns caused by material or manufacturing defects by fixing the de- fective pieces or replacing them at
our discretion.
Should assistance be required once or several times during the warranty period, the expiry date of this warranty will remain
unchanged.
Non sono soggetti a garanzia difetti dovuti all'usura, all'uso errato od improprio e a rotture causate da colpi e/o cadute.
This warranty will not cover defects due to wear, misuse or breakdowns caused by blows and/or falls. In addition, this warranty
will no longer be valid if any changes are made, or if the tool is damaged or sent to the customer service in pieces, or when it is
improperly used in the "FORCED START" and "MEMORY SAVER" modes
This warranty explicitly excludes any damage to people and/or things, whether direct or consequential.


DECLARATION OF CONFORMITY

We hereby declare, assuming full responsibility, that the described product complies with all the relevant provisions of the
following Directives:
• Electromagnetic Compatibility Directive (EMC) 2014/30/EU;
• Low Voltage Directive (LVD) 2014/35/EU;
• Directive concerning the restriction of the use of certain hazardous substances in electric and electronic equipment (RoHS)
2011/65/EU.
The Technical Brochure is available at:
BETA UTENSILI S.p.A.
Via A. Volta 18
20845 Sovico (MB)
ITALIA
Date 28/10/2022
9