Purpose Of Use; Work Area Safety - Beta 1498BC/12 Manual De Uso E Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
OPERATION MANUAL AND INSTRUCTIONS
OPERATION MANUAL AND INSTRUCTIONS
ISTRUZIONI PER L'USO
ISTRUZIONI PER L'USO
OPERATION MANUAL AND INSTRUCTIONS FOR STARTER MANUFACTURED BY:
BETA UTENSILI S.P.A.
Via A. Volta 18,
20845, Sovico (MB)
ITALIA
Original documentation drawn up in ITALIAN.
CAUTION
Store the safety instructions with care and hand them over to the users

PURPOSE OF USE

- The portable car starter can be used for the following purposes:
• starting vehicles with 12V batteries;
• charging electronic devices.
- The portable car starter must not be used for the following operations:
• use on any batteries other than 12V batteries;
• use outside the technical specifications contained in the TECHNICAL DATA table
• use for any applications other than stated ones.
• Do not use the starter if the battery is damaged or has been tampered with.

WORK AREA SAFETY

Do not operate the starter in environments containing potentially explosive atmospheres, because sparks may be
generated, which can ignite the dust or fumes.
Keep children and bystanders away from your workplace while operating the starter. Distractions from other people can
cause you to lose control over the starter during use.
Do not inhale any harmful gases that may be released by the battery of the vehicle while starting the engine.
"During connection operations, keep your face away from the battery of the vehicle. The battery contains corrosive
liquid; in the event of accidental contact with your skin or eyes, rinse immediately with water and seek medical advice."
Do not drop any metal tools on the battery of the vehicle: the battery may short-circuit.
Use the starter in a dry area, avoiding humidity.
PORTABLE STARTER SAFETY
• Do not use the starter in place of the vehicle's battery.
• Do not use the starter as a toy.
• The use of the starter with a non-recommended accessory could lead to the risk of fire, electrocution or injury to people.
• Before use, check that the starter has not been damaged, and that there are no uncovered cables
or worn parts.
• After starting the vehicle, disconnect the starter within 30 seconds to avoid damage.
• In the case of multiple starting, wait for two minutes between one start and the next. Do not perform more than three starts at a
time; overheating could damage the starter.
• Do not use the starter's connection cable with other equipment.
• Do not store the starter in places where the temperature could reach 60°C.
• Charge the starter only in environments with a temperature of between 0°C and 45°C.
• Do not expose the starter to extreme heat or fire.
• Disconnect the power supply by pulling out the plug, do not yank the cable.
• Do not charge the starter immediately after starting the vehicle.
6
IMPORTANT! READ THIS MANUAL THOROUGHLY BEFORE USING THE
EMERGENCY STARTER. FAILURE TO COMPLY WITH THE SAFETY
STANDARDS AND OPERATING INSTRUCTIONS MAY RESULT IN
SERIOUS INJURY.
EN
EN
I
I
Tabla de contenido
loading

Tabla de contenido