Operating Instructions; Preselecting The Speed - Flex DGE 8-32 Instrucciones De Funcionamiento Originales

DGE 8-32

Operating instructions

WARNING!
Before performing any work on the electric
power tool, pull out the mains plug.
CAUTION!
The available mains voltage and the voltage
specifications on the rating plate must be the
same.
Before switching on the power tool
Unpack power tool and accessories and

check that no parts are missing or
damaged.
Insert grinding tool.

Inserting and changing the grinding
tools
Hold the grinding spindle with the locking

button (1.). Turn the size 17 single head
wrench anti-clockwise and loosen the
clamping nut (2.).
Insert the grinding tool all the way into the

chuck (3.).
Hold the grinding spindle with the locking

button (4.)
Turn the size 17 single head wrench (5.)

clockwise and tighten the clamping nut.
Release the locking button.

NOTE
Use undamaged, true running grinding tools
only. If required, use a whetstone or replace
grinding tool.

Preselecting the speed

To set the operating speed, move the dial to
the required value.
Switching the electric power tool on
and off
Brief operation without engaged switch rocker
Push the switch rocker forwards and hold

in position.
To switch off the power tool, release the

switch rocker.
21