System Setup - GrowMax Water EC ELIMINATOR 0.0 Manual Del Usuario

Note:
Do not install the unit where the source/inlet pressure may be more than 80 psi
(5 kg/cm2) or there are excessive water hammer/spike problems. If your inlet
pressure is more than 80 psi, install a pressure regulator, available at your
Grow Max Water dealer or your local hardware store.
Protect unit against freezing.
System Set Up:
1. Inlet tubing
2. MaxPur™ sediment filter
3. CleanGreen™ carbon block filter
4. Reverse osmosis membrane
5. Pressure gauge
6. De-ionization filter
7. Outlet tubing
8. Shut-off valve
9. Inlet connectors
1. Membrane Housing
2. Purified Water Line
3. Waste Water Line (Black)
4. Automatic Shut-off Valve
5. Flow Restrictor
7
8
2
3
4
4
5
6
3
5
2
9