System Setup - GrowMax Water MAXQUARIUM 000PPM Manual De Instrucciones

Note:
Do not install the unit where the source/inlet pressure may be more than 80 psi
(5 kg/cm2) or there are excessive water hammer/spike problems. If your inlet
pressure is more than 80 psi, install a pressure regulator, available at your
Grow Max Water dealer or your local hardware store.
Protect unit against freezing.
System Set Up:
1. Main unit
2. Inlet tubing
3. Sediment filter
4. Green coconut carbon filter
5. Reverse osmosis membrane
6. Pressure gauge
7. De-ionization filter
8. Outlet tubing
9. Shut-off valve
10. Inlet Connectors
1. Membrane Housing
2. Purified Water Line
3. Waste Water Line (Black)
4. Automatic Shut-off Valve
5. Flow Restrictor
6
8
9
2
3
4
1
1
5
4
7
5
2
3
1