Warranty - Dometic SP230 Instrucciones De Uso

Abbreviation
L
GND
N
The following components are illustrated as numbered items in the wiring diagram figures:
Item
1
2
3
4
5
6
7
1. Mount the device by the four mounting flanges using appropriate screws.
2. Connect wires from IN to the 230 V mains supply. It it recommended to use a miniature circuit breaker (MCB)
and a residual-current device (RCD)
fig. 3 on page 2
3. Connect wires from OUT to electrical devices that should only have power supply when there is power from the
230 V mains supply. These electrical devices will never receive power from the battery. Connect a battery charg-
er and connect it to the battery to charge the battery
fig. 4 on page 3
4. Connect wires from INVERTER to the inverter
devices connected to OUTPUT with power when there is no mains from grid.
Note This wiring depends on inverter model. See manual for inverter for connection instructions.
fig. 5 on page 3
5. Connect wires from OUTPUT to electrical devices to be controlled by the priority switch. It is recommended to
connect a residual-current device (RCD)
fig. 6 on page 3
6. Check the three LED indicators to confirm that the wiring is correct, see table in

8 Warranty

The statutory warranty period applies. If the product is defective, please contact the manufacturer's branch in your
country (see dometic.com/dealer) or your retailer.
For repair and warranty processing, please include the following documents when you send in the device:
Description
Line conductor
Ground conductor
Neutral conductor
Description
Miniature circuit breaker (MCB)
Residual-current device (RCD)
Battery charger
Battery (charging)
Inverter
Battery (supplying voltage)
Residual-current device (RCD)
to ensure electrical safety.
when mains from grid is available.
and then to the battery. The battery
to ensure electrical safety.
Color
Brown
Yellow/green
Blue
will supply the electrical
Using the device.
EN
7