Installation - PAJ GPS VEHICLE FINDER 4G 2.0 Manual De Instrucciones

2.5 Installation

1.
2.
24
Connect the VEHICLE Finder 4G 2.0 to the
wiring harness via the black plug-in function
and place it in the desired location. Please
note that the deeper the GPS tracker is
hidden, the harder it is to get a very good
GPS signal.
Connect the finder to the battery. Connect
the red cable to
cable to MINUS (-).
NOTE!
When connected to the power supply, the Vehicle
Finder 2.0 switches on immediately and the LED lights
emit a signal. If the FINDER is not connected to the ve-
hicle battery, but at a different point (e.g. fuse box), this
can result in the ignition on / off function not being ac-
curately recognized.
PLUS (+). The black