Frequently Asked Questions - Hkoenig oly900 Manual De Instrucciones

3. Pick carefully your ingredients and remove any trace of dirt, iron
residue, sand, stones, wood, or anything else that is not suitable for
being squeezed.
4. If you haven`t used the oil pressing machine for a long time and
decide to use it again, take into consideration that you first have to
process a small quantity of ingredients just to clean the extrusion
shaft, we would advise you not to drink the oil that comes out first.
5. Check if all the parts are well fitted, if not, fit them accordingly to
instructions. Don`t operate the machine if the parts are not in place.
6. Don't try to disassemble the extrusion shaft or the outer element
immediately after processing, leave them to cool off, otherwise, you
will burn your hands. The parts are hot immediately after processing.
7. We advise you to follow the operating guidelines provided. Do not
operate the oil pressing machine for more than 45 minutes, however,
if it enters protection mode, do not force restart, leave it for 30
minutes to cool down and then try to start it again.

FREQUENTLY ASKED QUESTIONS

Is the machine safe? Did it pass testing?
Yes - it is safe, it is UL and CE certificated.
Which is the power rating?
Motor power is rated at 180W, the heating element power is rated at 300 W. The motor runs as long
as it processes, the heating element runs just when heating the extrusion shaft. The motor does not
run all the time at full power.
How much material can be put in the hopper at one time?
The hopper can hold 400-450g of ingredients, the extracted oil meets the daily needs of 3-5 people.
What is oil content and extracting rate?
It depends a lot on the type of ingredient you are squeezing. Usually, seeds or nuts produce around
40-75 % of their weight as oil.