DiO BELL-B11 Guia De Inicio Rapido página 41

6. Reset
6.1 Resetting the chime
Press and hold the
to indicate that the code deletion is successful.
6.2 Resetting the doorbell
7. Explanation of the LED intensity on the doorbell
Slow flashing
Fast flashing
LED off
Dimming of the
LED
8. Troubleshooting
1. You press the push button, but its indicator light does not respond...
What should I do?
a) Check if the batteries have been installed.
b) Check if the batteries are completely worn out. If so, replace them as
soon as possible.
NOTE: Do not mix new and used batteries. Replace all batteries at once.
2. I can't pair my unit to my DiO application... What should I do?
button for approximately 5 seconds, a tone will sound
Using a screwdriver, open the back panel of the
doorbell and hold down the push button (front) for
15 seconds.
Waiting for pairing (see point 4.).
The doorbell receives the pairing information and
starts to connect to the router
Standby mode.
Firmware update.