Indoor Unit; Using The Product - DiO BELL-B11 Guia De Inicio Rapido

DiOBELL-B11
1x
2.1 Installation of the outdoor unit battery
1x

2.2 Indoor unit

3 Using the product

After plugging the indoor unit into your wall socket, there are only a few
steps left to get your new chime operational.
1. Press and hold the
3 seconds, the chime will emit a «Ding-Dong» sound to indicate that it has
entered pairing mode.
2. Now press the button on the doorbell camera, the chime will sound to
indicate that the pairing has worked.
3. Choose the volume and music of your choice and press the push button
again to save your choice.
Note: You can associate up to 20 bells per chime.
Lens
LED
Push button
1. Remove the insulating tab before use.
2. Remove the screw with a crosshead
screwdriver to access the battery com-
partment.
3. Insert the batteries, making sure that
the polarity is correct (+/-)
4. Close the compartment with the screw.
Plug the chime into a suitable socket with
a power rating of 110~240V
button on the side of the chime for approximately
1x
name
1x
1x