Emergency Procedure; General Power Tool Safety Warnings - Gude HO 18-0 Traducción Del Manual Original

Emergency procedure

Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly as
possible. Protect the injured person from further harm
and calm them down.
If you seek help, state the following pieces of informa-
tion:
1. Accident site,
2. Accident type,
3. Number of injured persons,
4. Injury type(s)
Symbols
Warning / Attention!
Pour réduire le risque de blessures, l'utilisa-
teur doit lire la notice d'instructions
Wear eye protective goggles!
Wear ear protectors!
Wear a suitable dust protection mask.
Wear protective gloves.
Remove the battery pack before starting
any adjustment, cleaning and maintenance
work on the device.
Class III tool.
V
Voltage
n
No-load speed
0
Direct Current
CE marking
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
Battery
Protect the battery against heat and fire.
Protect the battery against water and
moisture.
Protect the battery against temperatures
above 40°C.
MAX 40°C
Do not throw the batteries in household
waste.
Li-Ion
Deliver the batteries to a collection centre of
old batteries where they will be recycled in
an environmentally friendly way.

General Power Tool Safety Warnings

WARNING Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future referen-
ce.
The term „power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive atmosphe-
res, such as in the presence of flammable liquids,
gases or dust. Power tools create sparks which may
ignite the dust or fumes.
c) Keep children and bystanders away while opera-
ting a power tool. Distractions can cause you to lose
control.
2) Electrical safety
a) Do not expose power tools to rain or wet conditi-
ons.Water entering a power tool will increase the risk of
electric shock.
Personal safety
a) Stay alert, watch what you are doing and use com-
mon sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
b) Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protec-
tion used for appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch on
ENGLISH
17