Stem And Handlebars - Lapierre sit and go! Manual De Utilización

II— Settings
1 Saddle position
2
You may suffer some initial discomfort before your body
becomes accustomed to sitting on the saddle. However,
the position of the saddle may also cause some irritation.
To avoid this kind of problem, in general a level saddle position
is best. Of course, the saddle can be slightly tilted depending on
the body shape of the rider. You can also adjust the fore and aft
position of saddle for comfortable pedalling and the correct back
position.
When you do find the correct position, the saddle must be
securely tightened so that it can no longer move while riding.
1

Stem and handlebars

3
To adjust the height of the stem:
1 First loosen the stem expander bolt two or three turns, then
tap the top of the stem expander bolt to loosen the stem quill.
2 Then you can freely adjust the height of the stem, but be
careful not to exceed the minimum insertion mark. When you
retighten the stem, be sure to respect the torque specifications
and to align the stem with the front wheel.
If you have a threadless headset, we recommend that you
consult your Lapierre authorized dealer who can flip the stem
™
or remove spacers.
All manuals and user guides at all-guides.com
After making adjustments to the stem, check that the stem
is tightened by trying to turn the handlebars left and right while
you hold the front wheel between your legs.
For your safety, adjust your handlebars so that you can easily
access the brake levers and the shifters.
Please note ! The stem has a minimum insertion mark "STOP"
or "INSERT MINI". If this mark is visible, the stem may break,
causing potential injury, and the terms of the warranty will be
cancelled. For threadless headsets, always make sure the bolts
are correctly tightened.
For your safety, respect the torque specifications of
the different components.
Check your bike before and after every ride for play or
vibrations, which will help identify if a part is not tightened
correctly or needs replaced.
39
GB