Zwilling ENFINIGY 53106-0 Manual De Instrucciones página 19

EN
earthed socket which has been
installed according to regulations and
cannot be reached by leaking water.
Only operate the device if the voltage
stated on the type plate matches the
voltage of your socket.
The device has a high power con-
sumption. For this reason, do not
connect the device to multiple sockets
or extension cables.
Make sure that the connecting cable
is not kinked or pinched and make
sure that the connecting cable and
the device do not come in contact
with sources of heat (e.g. hobs, gas
flames).
When unplugging the device from the
socket, always pull on the mains plug
not on the cable. Do not carry the
device by the connecting cable.
Never touch the power plug with wet
hands.
In the event of danger or a defect,
immediately unplug the mains plug
from the socket. For this reason, keep
the socket which the device's mains
plug is plugged into easily accessible
at all times.
Unplug the device from the socket
prior to cleaning it.
Never unscrew the device and do not
make any technical modifications.
www.zwilling.com
Never immerse the device in water
or other liquids, do not clean it under
running water and never put it in the
dishwasher.
When the device is switched on, there
is a risk of scalding from hot water or
hot steam:
Do not move or transport the device
while the brewing is in process.
Water may spoil if it is left in the de-
vice for several days:
Do not leave any water in the device
when it is not in use. Pour out any
water that is not needed. Clean the
device regularly.
A faulty device can cause damage
and injuries:
Always check the device for damage
prior to use. Do not use the device if
the thermos jug is cracked. Only use
suitable original ZWILLING thermos
jugs. Use the jug carefully, as the
inside of the jug is fragile Do not use
other glass jugs or plastic vessels that
are not heat-resistant..
Never operate a faulty device. Never
operate an device that has been
dropped.
In the event of a defect or a dam-
aged connection cable, the device
must be repaired by the manufacturer,
its customer service or a similarly quali-
Safety
19