Replacing The Batteries; Extension Cords - MAXSA 40227 Instrucciones De Montaje Y Funcionamiento

REPLACING THE BATTERIES

When the charging ability of the batteries decreases, you can replace the batteries with
three new AA rechargeable NiMH batteries. Follow the steps below.
Move the power switch on the main body to the OFF position.
1.
Remove the screw on the left side of the unit that holds the mounting bracket.
2.
Remove the main unit from its mounted surface.
3.
Once the unit is open, slide down the battery cover.
4.
Carefully remove the batteries from their compartment and replace with three new
5.
AA rechargeable NiMH batteries.
Close the plastic cover and reassemble the metal cover and the main body together
6.
with the screw removed in step 2, ensuring that the two parts are put together securely.
Repeat the steps in "Before first time use of your Solar Security Light" section on page
7.
3 to ensure your new battery is fully charged.
NOTE: Do not dispose of batteries in general household trash or into a fire since
the batteries may explode. Consult your local regulations for correct disposal
of batteries. The batteries may also be returned to MAXSA Innovations at 8412
Cathedral Forest Dr., Fairfax Station, VA 22039. Do not take apart the batteries
since they contain corrosive chemicals.
STORAGE
If you wish to store your light indoors for more than two or three days, turn the power switch
to the OFF position to prevent damage to the batteries. Battery capacity may be reduced
during prolonged storage. For optimal performance, we recommend that you do not store
your Solar Security Light for prolonged periods of time.

EXTENSION CORDS:

A 15-foot extension cord is available for this product for $14.95, which covers shipping and
handling costs as well. This extension cord allows the solar panel to be placed higher or
further away from the security light to ensure maximum direct sunlight exposure. For
more information, please call 703-495-0661. Ask for extension cord model EXT-Black.
6
Front
Back