Maintenance Tips - MAXSA 40227 Instrucciones De Montaje Y Funcionamiento

TIME PERIOD ADJUSTMENT (TIME)
The time period control sets the duration that the Solar Security Light will remain illuminated
after the last detected motion. The time period is adjustable between 10 seconds to 1 min.
The shortest time period is with the TIME control set fully counter-clockwise (–). Increase
or decrease the time period by adjusting the TIME dial and re-trigger the sensor unit.
Continue with this process until the desired time period is obtained. Note: It is best to keep
it on the shortest time period that works so that you conserve battery life.
MOTION SENSOR ADJUSTMENT (SENS)
The motion sensor on this Solar Security Light is temperature-sensitive. The cooler the
temperature, the more sensitive the motion sensor will become. Use the SENS dial to
adjust the sensitivity of the motion sensor to compensate for environmental temperature
changes. The motion sensor is most sensitive when the SENS dial is turned fully clockwise
(+).
To decrease sensitivity, move the dial toward the ( – ) symbol.
To increase sensitivity, move the dial toward the ( + ) symbol.
LIGHT LEVEL ADJUSTMENT (LUX)
The LUX dial controls the natural light level that triggers the Solar Security Light and
prevents the light from operating during daylight hours. Your Solar Security Light comes
preset and will be activated when motion is detected at dusk.To adjust for activation in a
brighter setting, move the dial toward bright (). To adjust for activation in a darker setting,
move the dial toward dark ( ).
HOW TO TEST THE COVERAGE
Point the motion sensor in the direction that you want to detect motion and set the TIME
dial to the minimum (-) position and the LUX dial to "light" () position.
Test the coverage of the area by walking slowly around the area of detection and adjust
sensitivity if needed. If the Solar Security Light does not come on, you may need to adjust
the angle of the sensor unit. Readjust the TIME and LUX dials when finished

MAINTENANCE TIPS

The LED lights in your Solar Security Light will last up to 30,000 hours and should never
need replacement.
To keep your Solar Security Light looking new, keep the lens free of dust and deposits by
wiping occasionally with a dry cloth or with warm soapy water.
It is important that the solar panel is kept free of dirt and debris at all times. A dirty
solar panel will not allow the batteries to be fully charged. This will shorten the life of the
batteries and may cause the light to malfunction.
5