Hendi 209943 Manual Del Usuario página 6

Ocultar thumbs Ver también para 209943:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 42
Preparation befor use
• Remove all protective packaging and wrapping.
• Check to make sure the appliance is undamaged and with
all accessories. In case of incomplete delivery and damages
please contact supplier immediately. Do not use the appli-
ance.
EN
• Clean the appliance before use (See == > Cleaning & Main-
tenance).
• Make sure the appliance is completely dry.
• Keep the packaging if you intend to store your appliance in
the future.
User manual
NOTE: Before first use, fill the appliance with water up to the
maximum level, boils water and then pours boiling water out,
then clean the appliance with cool water. Repeat this operation
for one or two times to completely eliminate dust caused in pro-
duction or storage.
• Put the power base at flat and stable surface.
• Open the lid and pour the appliance with appropriate amount
of water.
• Close the lid and put the appliance on the power base.
• Plug the power cord into the socket.
• Touch tempearture control button - the indicator light will
light up and display 100°C (water will be heated to max. tem-
pearure under this setting). If you choose other tempearture:
40 / 60 / 80°C by touching the button, appliance automatically
will cut off the heating when the water reach each choosen
temperature (±7°C). After that appliance start PTC insulation
function - water tempearture will be maintenance at 40, 60
or 80°C (±7°C).
NOTE: For canceling the tempearture control function - touch
the temperature control button softly until the display shows
"--".
• Thermostat safty switch will cut off the power supply auto-
matically after water boiled for 10 second (when you set tem-
pearure to 100°C), in the meantime, the indicator light off.
NOTE: DO NOT set the appliance to a heated state immediate-
ly after the power cutted off automatically. If you need continue
heating, wait for 30-60 sec., then press button - DO NOT open
the lid during boiling.
• After boiling, wait few seconds, lift appliance from the base
by the handle and pour the water.
NOTE: After using alway put out the appliance from the power
base or disconnect the plug from the socket.
Cleaning & Maintenance
ATTENTION! Always disconnect the appliance from the elec-
trical mains and cool down before storage, cleaning & main-
tenance.
Do not use water jet or steam cleaner for cleaning and do not
push the appliance under the water as the parts will get wet
and electric shock might be resulted.
Cleaning
• Never immerse the appliance in water or other liquids.
• Clean the cooled exterior surface with a slightly damp cloth or
sponge with some mild soap solution.
• Never use abrasive sponges or detergents, steel wool or
metallic utensils to clean the interior or exterior parts of the
appliance.
6
• Never use aggressive cleaning agents, abrasives or chlorinat-
ed cleaners. Do not use any sharp or pointed objects. Do not
use petrol or solvents!
• Avoid water contacting the electrical components.
Maintenance
• As soon as you feel the appliance isn't working correctly or
there is a problem, stop using the appliance, shut it off and
contact the supplier.
• Clean and descale the internal surface of the appliance at
regular intervals (see "Descaling").
Descaling
This appliance should be cleaned and descaled frequently to
keep it in optimum condition and to ensure its operation. De-
pending on the hardness of the water and the frequency of use,
you need to repeat the following procedure regularly.
To descale you can use pure lemon juice, citric acid or white
vinegar as a descaling agent. The general mixture applies of 1/3
cleaning vinegar or lemon juice to 2/3 water. If needed, use only
pure white vinegar whitout water.
• Pour about 0,5L of mixture or pure vinegar into the appliance.
Wait about 1h for loose of the scale deposit.
• Pour solution out and wape off the residues with the wet cloth.
• Fill the appliance with water and set max. tempearture.
• Pour water out after boiling and rinse internal surface
throughly with clean water about 4-5 times till taste and smell
are completely gone. The appliance is reade to use again.
• If necessary, repeat the above steps for complete cleaning.
NOTE: Warranty is void if failure to lack of regulary descaling
will leads to reduced functioning or failure of the appliance.
Warranty
Any defect affecting the functionality of the appliance which
becomes apparent within one year after purchase will be re-
paired by free repair or replacement provided the appliance has
been used and maintained in accordance with the instructions
and has not been abused or misused in any way. Your statutory
rights are not affected. If the appliance is claimed under war-
ranty, state where and when it was purchased and include proof
of purchase (e.g. receipt).
In line with our policy of continuous product development we
reserve the right to change the product, packaging and docu-
mentation specifications without notice.
Discarding & Environment
When decommissioning the appliance, the product must not
be disposed of with other household waste. Instead, it is your
responsibility to dispose to your waste equipment by handing it
over to a designated collection point. Failure to follow this rule
may be penalized in accordance with applicable regulations on
waste disposal. The separate collection and recycling of your
waste equipment at the time of disposal will help conserve nat-
ural resources and ensure that it is recycled in a manner that
protects human health and the environment.
For more information about where you can drop off your waste
for recycling, please contact your local waste collection compa-
ny. The manufacturers and importers do not take responsibility
for recycling, treatment and ecological disposal, either directly
or through a public system
Tabla de contenido
loading

Tabla de contenido