SNOWJOE sunjoe 24V-PSW25 Manual Del Operador página 14

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Troubleshooting
• Remove battery from the unit before carrying out maintenance on the machine or when checking that its parts are in proper
working order.
• To avoid unnecessary hassles, consult the following table before contacting customer service with any mechanical issues.
Problems
Machine refuses
• Battery is flat.
to start
• The battery protection system is
Fluctuating pressure
• Pump sucking air.
• Valves dirty, worn out, or stuck.
• Pump seals worn out.
Machine stops
• Battery is flat.
• Nozzle partially blocked.
Machine pulsating
• Inadequate supply of mains water.
• Nozzle partially blocked.
• Water filter blocked.
• Hose kinked.
Machine starts, but
• Pump/hoses or accessories frozen.
no water comes out
• No water supply.
• Water inlet filter blocked.
• Nozzle blocked.
All manuals and user guides at all-guides.com
Possible Cause
active.
Possible Solution
• Charging the battery.
• Turn off the unit and wait for 10 minutes, then turn on
the unit again
• Check the hoses and connections are airtight.
• Clean or replace valves/seals.
• Please call the Snow Joe
service center at 1-866-SNOWJOE (1-866-766-9563)
for assistance.
• Charging the battery.
• Clean the nozzle.
• Check that the water tank is filled.
• Clean the nozzle.
• Clean the water inlet filter.
• Straighten out the hose to remove any kinks/blockages.
• Wait for pump/hoses or accessories to thaw.
• Fill water in the water tank
• Clean the filter.
• Clean the nozzle.
14
+ Sun Joe
customer
®
®
Tabla de contenido
loading

Tabla de contenido