Behringer BIGFOOT Guia De Inicio Rapido página 23

Step 1: Controls
(EN)
Quick Start Guide
CAPSULE – This area is where the
(1)
microphone diaphragms pick up sound.
GAIN – This knob adjusts the level of the
(2)
microphone's output signal through the
USB or PHONES output.
PATTERN – Depending on your recording
(3)
needs, use this rotary switch to choose
between four polar patterns:
Stereo, Omnidirectional, Cardioid
or Bidirectional.
MUTE – Press this button to mute off the
(4)
microphone's output. When muted,
the LED embedded in the button will light
up red. When unmuted, the LED will light
green and show normal operation/
bus-power is active.
VOLUME (PHONES) – Turn this knob to
(5)
adjust the output volume for the
PHONES jack.
PHONES – This output connects to
(6)
headphones with 1/8" stereo plugs.
Use this output to monitor your
microphone sound in real time with
no latency.
USB – Connect the microphone to a
(7)
computer with a USB cable.
THREAD – Mount the microphone on a
(8)
standard microphone stand by using the
built-in mounting thread. If necessary,
remove the reduction thread to adapt the
mounting to your tripod.
23