AnyTone METIS Manual De Instrucciones página 12

4. HOW TO USE THIS RADIO
4.1 Power On/Off the Radio
(1) Turn VOL knob
number.
(2) Turn VOL knob
4.2 Control de volumen
Turn VOL knob
①
4.3 Control ASQ/SQ
• ASQ (Automatic Squelch Control)
Turn SQ knob
②
manual adjustment and a permanent improvement between the sensitivity and the
listening comfort when ASQ is active. This function can be disconnected by turning the
switch clockwise. In this case the squelch adjustment becomes manual again. "
disappears from LCD
• SQ (Manual squelch)
Turn the SQ knob
disappear. This adjustment should be done with precision as, if set to maximum (fully
clockwise), only the strongest signals will be received.
4.4
• Channel Selector (short press)
(1) These keys allow increasing or decreasing a channel. A beep sounds each time the
channel changes.
(2) Hold or
• Scan (very long press)
(1) Press and hold the
function, LCD displays "SC".
(2) Short press
(3) Short press
4.5 Mode
• Mode control (short press)
(1) Short press
(2) The LCD displays the selected mode.
• Keypad Lock (long press)
(1) Long press
(2) Long press
form LCD.
In lock Mode all keys except PTT is valid
4.6 TSQ
• CTCSS/DCS (short press)
(1) Short press
when the TSQ function is enabled.
This function is only enabled in FM mode.
clockwise to power on the radio, the LCD displays channel
①
anti-clockwise, until hear "Ka Ta", the radio is powered off.
①
clockwise to increase volume, anti-clockwise to decrease volume.
anti-clockwise into ASQ position. LCD displays "
clockwise to the exact point where all background noises
②
can fast change working channel.
or key for 7 seconds or until a beep sounds to start scan
or key to change scan direction during scan.
or [PTT] key to exit scan function.
key to switch between AM / FM mode.
key for over 2 seconds to lock the keys, LCD displays "
key for over 2 seconds again to unlock the keys "
key to enable/disable CTCSS tone or DCS code,LCD displays "
". No repetitive
"
".
" disappears
"