Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Settings/Service 03: Door Traffic
If confirmation key
display visualises the door opening recording
made in the last day.
d
=05/11
01h34m
long:03
tot:15
d=05/11 : Day and month of the recording
long: 03: Number of door openings
01h34m : Total duration of door openings
tot:15 : Total number of door openings
To pass to the recording of the other days, press
keys
and
.
Press key
to go back to the Main Menu.
Settings/Service 04: Settings
Press confirmation key
programming mode. The first row of the display
shows the first parameter with the current value
and the unit of measure. On the second flow
instead a brief description of the setting appears.
A01 = -5°C
low Alarm
By pressing keys
parameters can be scrolled. Press
the displayed setting variation: by pressing keys
and
the setting value can be modified;
confirm the setting variation by pressing key
A01 = -5°C
New = -5
Press key
to go back to the Main Menu.
Press key
for more than five seconds to send
the setting list to the printer.
Settings/Service 05: Memory deletion
Press confirmation key
to restore the original settings.
is pressed, the LCD
to enter in setting
and
, all controller
to access
.
to access the request
Reset Memory?
No
Ok
No deletion is performed; by pressing key
entire memory is deleted.
Settings/Service 06: Initial Conditions Reset
Press confirmation key
the original settings.
Restore ?
No
Ok
the menu. No restore is performed; press key
to restore the original settings: the controller
restarts as a simple thermometer.
Settings/Service 07: Test Data
Service 07
Data CycleTest
visualised directly on the LCD display, by
selecting Settings/Service 07 menu
Settings/Service 08: Start Test
Service 08
Start CycleTest
enabled to the test management of the refrigerator
unit. This function carries out a series of
programmed
operations
significant temperature and the run time of the
refrigerator unit. With the detected data, the
refrigerator unit behaviour can be analysed by
performing a functional test.
Settings/Service 09: After Sales Assistance
Press confirmation key
setting mode The flashing character can be
modified using the
pressing key
, confirm the value and pass to
the next data.
Press key
to go back to the Main Menu.
Service 09
Assistance
23
ENGLISH
Press key
to exit.
the
to request the restore
Press key
to exit
Test
data
can
be
The
controller
is
by
recording
the
to access after sales
and
keys. By
GB
Tabla de contenido
