Tabla de contenido
Idiomas disponibles
Idiomas disponibles
It is important to use the right paper for each job. For rough sanding use grain sizes up to 80, f
as larch, pine or spruce use papers from 60grit t
sizes with up to 220 can be used.
(Fig.4)
Switch o
The sanding plat
ed with a hook and eye system for sanding sheets. This enables rapid applica
of new sheets without the need for a tensioning system. Before applying a new sheet, tap the dust from
the hook and eye fastening of the sanding plate. Stretch the sanding paper over the sanding plat
ensure that the holes (4) of the plate and the disc match up.
Dust extr
(Fig.1)
Connect the dust c
frequently. It is possible to employ and external vacuum by using a suitable adapter (ask in shop). Always
work with a dust extr
Switching on and off
(Fig.2)
1. Connect the plug to a power socket
2. Switch on con
3. Switch off con
Sanding
1. P
n re sanding surface on the piece of work
2. Switch the machine on and guide it over the surface to be sanded using cir
ressure to the machine when sanding, the weight of the machine itself is usually su
ensure op
rev
paper that gradually ge
Polishing
1. Apply polish using a cross-coat method and allow drying slightly before polishing. When you have
completed your work, reduce the pressur
switch the machine o .
CLEANING AND MAINTANCE
CAUTION! Before performing any care or maintenance work, disconnect from the power.
Use a dry brush to clean the dust extr
not use solvents! Then dry well. Remove the dust c
carefully, try not to create dust. Do not breathe in saw dust! Wash out the bag in cold soapy water and
allow drying.
Before each use, check the machine, the cable and accessories to ensure that they are not damaged. Have
any necessary repairs completed by a specialist.
Machines that no long
regula
ENVIRONMENT
Do not dispose of electric tools, accessories and packaging together with household waste material -
in observance of European Dir
implementa
cordance with na
be collected separately and returned to an environmentally compa
connect the power.
to the dust extr
system connected.
ra
ress bu on(2)
ra
ress bu on(2)
good r
r.
roperly should be disposed o correctly in accordance with the local
v
EC on waste of electric and electronic equipment and its
aw, electric tools that have reached the end of their life must
For dense hardwood as beech or maple, the grain
connect
ete several sanding processes using sand
rom the piece you are working on, and then
rom the plas
recycling facility.
GB
wood
evel, and empty
nt to
to empty. Empty
Tabla de contenido
