Symbols; Operating Instruction - MaxPro PROFESSIONAL MPHG2001 Manual De Instrucciones

Do not let paint be a ached onto a movable scraping knife for the air outlet. Otherwise, the paint will be
on fire a er a cert
Paint removal
Do not use the tool to remove lead-containing paint. Since stripped paint, paint residues and smoke may
contain lead and the lead belongs to a toxic substance, once the lead is accumulated on the surface, it may
be swallowed due to the behavior of touching the mouth with the hand. Even though a very li
is absorbed, incurable brain and nerve system damages may be caused. Children and fetuses are the most
vulnerable.
During paint removal, the worksite shall be kept to be closed and please use a dust mask.
Do not set the paint on fire. A scraping knife shall be used. Keep the distance between the air outlet and the
paint removing surface to be at least 25mm. If the paint is scraped along a ver cal direc
scrape the paint to prevent the paint from falling into the heat gun and ge
A er comple roughly clean the worksite and safely dispose the removed paint.

SYMBOLS

Read the manual
Warning
Double isula
Wear eye prot

OPERATING INSTRUCTION

① Nozzle
② Air vents
③ Switch (0/1/2/3)
Cut off the power before the tool is assembled or adjusted.
Air temperature can be adjusted to adapt to a wider applica
for different applica
Se Applica
Level II Dry tone test samples, packing, adhesives, cons
Dry wet wood.
Remove pasters.
Catalyze adhesives such as contact adhesives on join
accelerate the gluing process, melt bonding points and remove or s
plates.
Wax or dewax. Shrink packages and PVC insula
Melt frozen stairs, door locks, deck lid, car doors and water pipes. Unfreeze frost deposit on
refrigerators and ice boxes.
4
e
Do not touch metallic parts to avoid scalding.
Wear dusk mask
Do not dispose of old appliances in the
household garbage
Disconnect from power supply while
maintance
scope. The following table is a reference
nts and plaster models.
g planes, ac vate adhering glue,
GB
of lead
downwards
plas films on edges of