Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4 Assemble the middle support
Insert the 4pcs upper support to the lower
Support. Secure them with 8pcs screw 3/16"
Hardware used
3/16 "
screw
(Qty 8)
Philips
screwdriver
(Qty 1)
28
5
Assemble the flame screen to the
upper support.
Secure the flame screen to the upper
support using 8pcs screw 3/16 ".
Hardware used
3/16 "
screw
(Qty 8)
6
Assemble the reflector onto the flame
screen.
Screw the 3pcs stud on the flame screen,
Put 3pcs washer Ø6 onto the top of stud,
then put the reflector onto the stud,secure
them with 3pcs washer Ø6 and 3pcs wing
nut.
Hardware used
Wing nut
(Qty 3)
Philips
screwdriver
(Qty 1)
Washer Ø6
Stud
(Qty 6)
(Qty 3)
Tabla de contenido
