hirsh industries RTA-2162X Instrucciones De Montaje

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Mobile Bookcase Assembly Instructions
Before you begin:
Open, identify, and count all parts prior to assembly. Two people are required to safely assemble.
Components and Hardware:
(40) Hex Screws
(4) Large
Spring Washers
(1) Allen Key
Attach Shelves to Leg Supports:
1.
Position (2) Leg Supports and a Shelf onto a flat
surface as shown in Figure 1.
2.
To attach Shelf to Leg Supports insert Hex Screws
through the screw holes for both the Leg and Shelf,
and hand tighten a Nut and Small Spring Washer onto
each Hex Screw.
3.
Tighten the Nuts onto the Hex Screws using the
supplied Wrench and Allen Key. Figure 2
4.
Repeat steps 2 through 3 to attach the remaining
Shelves.
Figure 2
Wrench
Hex Nut
Small Spring
Washer
10/16
For parts please visit www.hirshindustries.com. For assembly assistance, please call 1-800-383-7414.
(40) Hex Nuts
(40) Small
Spring Washers
(2) Locking Wheels
(1) Wrench
Hex Screw
Allen Key
Read all instructions and review illustrations before assembly.
(2)Wheels
Shelves
Figure 1
Leg Supports
(5) Shelves
(4) Leg Supports
Page 1 of 2
loading

Resumen de contenidos para hirsh industries RTA-2162X

  • Página 5: Antes De Que Comience

    Instrucciones de Montaje de la Estantería Móvil Lea todas las instrucciones y revise las ilustraciones antes del montaje. Antes de que comience: Abra, identifique y cuente todas las piezas antes del montaje. Se requieren dos personas para montarlo de forma segura.
  • Página 6 Figura 3 Patas de Soporte Adjuntar los Estantes a las Patas de Soporte (continuación): 5. Coloque las Patas de Soporte restantes en la parte superior de los Estantes. Figura 3 6. Inserte un Tornillo Hexagonal a través del orificio del tornillo para las Patas de Soporte y el Estante, y apriete a mano una Tuerca y Arandela de Presión Pequeña en cada Tornillo Hexagonal.