Lifetime Air FT-23A Manual De Instrucciones página 4

Ocultar thumbs Ver también para FT-23A:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43
STRUCTURE
1. Front cage
2. Fan blade
3. Rear cage mounting nut
4. Rear cage
5. Motor shaft
6. Oscillating control
7. Main body
8. Screw and nut for cage
9. Blade nut
10. Fan base
11. Speed control
12. Tighten – turn to anti-
clockwise
13. Loosen – turn clockwise
14. Screw for base
15. Logo plate + screws
SPECIFICATIONS:
PLUG TYPE
VDE two round plug 220-240V~
ASSEMBLY
1. Place the main body (7) correctly in the fanbase (10) and
push it firmly in place.
2. Add the 4 base screws (14) to secure the base onto the
body.
3. Remove and discard the plastic packing sleeve (sticked on
the motor shaft (5)), required for transportation purposes
only.
4. Unscrew the mounting nut (3) from the motor housing.
5. Place the rear cage (4) onto the motor housing with the
handle pointing upwards. Do this by placing the 2 vertical
openings in the inner ring of the guard over the 2 motor
housing pins. Secure the guard firmly by tightening the
mounting nut (3) of the guard in clockwise direction.
6. Push the blades (2) along the motor shaft, then fasten
them securely by turning the blade nut (6) anti-clockwise.
7. Add the logo plate (15) on the front cage (1), secure the
logo plate by adding the 3 screws.
VOLTAGE FREQUENCEY
POWER
50Hz
23W
Tabla de contenido
loading

Este manual también es adecuado para:

871125219618

Tabla de contenido