Trust ACM-3500-3 Manual De Instrucciones página 7

9. Manual operation with a Trust Smart Home transmitter
1. Send an ON-signal to switch port I, II or III of the receiver on.
2. Send an OFF-signal to switch port I, II or III of the receiver off.
10. Single code delete
1. Press the learn-button of port I, II or III for 1 second. The learn-mode will be active for 15 seconds
and the LED-indicator will blink slowly.
2. While the delete-mode is active, send an OFF-signal with a specific Trust Smart Home transmitter
to delete the code.
3. The receiver will switch on/off 2 times to confirm code deletion.
11. Full memory delete
1. Press and hold the learn-button of port I, II or III (aprox. 7 sec.) untill the LED-indicator starts
blinking fast. The delete mode will be active for 15 seconds.
2. While the delete mode is active, press the learn button of the same port again for 1 second.
3. The receiver will switch on/off 2 times to confirm memory deletion.
ACM-3500-3 3-IN-1 BUILD-IN SWITCH
EN
2