Chain Sprockets And Chain Speeds; Minimum Groove Depth Of Guide Bars; Stihl Ap Battery; Sound Values And Vibration Values - Stihl MSA 160.0 C Manual De Instrucciones

English
MSA 220.0 C
– Permitted batteries:
– STIHL AP
– STIHL AR
– Weight without battery, guide bar and saw
chain: 3.1 kg
– Max. oil tank capacity: 210 cm³ (0.21 l)
– Degree of electrical protection: IPX4 (protec‐
tion against splash water from any direction)
For runtime, see www.stihl.com/battery-life.
21.2 Chain Sprockets and Chain
Speeds
MSA 160.0 C, MSA 200.0 C
The following chain sprockets may be used:
– 7-tooth for 1/4" P
– Maximum chain speed: 16.3 m/s
MSA 220.0 C
The following chain sprockets may be used:
– 6-tooth for 3/8" P
– Maximum chain speed: 23.3 m/s
21.3 Minimum Groove Depth of
Guide Bars
The minimum groove depth depends on the pitch
of the guide bar.
– 3/8" P: 5 mm
– 1/4" P: 4 mm
21.4

STIHL AP battery

– Battery technology: lithium-ion
– Voltage: 36 V
– Capacity in Ah: see rating label
– Energy content in Wh: see rating label
– Weight in kg: see rating label
– Permissible temperature range for operation
and storage: - 10 °C to + 50 °C
®
– Bluetooth radio interface (only for batteries
with ):
– Data connection: Bluetooth
mobile appliance must be compatible with
®
Bluetooth Low Energy 5.0 and support
Generic Access Profile (GAP).
– Frequency band: ISM band 2.4 GHz
– Maximum RF power transmitted: 1 mW
– Signal range: approx. 10 m. The signal
strength depends on the ambient conditions
and the mobile terminal. Signal range can
vary greatly depending on local conditions,
including the receiver. The range may be
perceptibly reduced inside enclosed rooms
58
®
5.1. The
and through metal barriers (such as walls,
shelves or cases).
– Mobile appliance operating system require‐
ments: Android or iOS (current version or
higher)
21.5 Sound Values and Vibration
Values
The K-value for the sound pressure level is
2 dB(A). The K-value for the sound power level is
2 dB(A). The K-value for vibration level is 2 m/s².
STIHL recommends wearing hearing protection.
MSA 160.0 C
– Sound pressure level L
to EN 62841‑4‑1: 85 dB(A)
– Sound power level L
in EN 62841-4-1: 93 dB(A)
– Vibration level a measured according to
hv
EN 62841-4-1:
– Control handle: 3.9 m/s²
– Handlebar: 4.6 m/s²
MSA 200.0 C
– Sound pressure level L
to EN 62841‑4‑1: 85 dB(A)
– Sound power level L
EN 62841-4-1: 93 dB(A)
– Vibration level a measured according to
hv
EN 62841-4-1:
– Control handle: 3.9 m/s²
– Handlebar: 4.6 m/s²
MSA 220.0 C
– Sound pressure level L
to EN 62841‑4‑1: 91 dB(A)
– Sound power level L
EN 62841-4-1: 99 dB(A)
– Vibration level a measured according to
hv
EN 62841-4-1:
– Control handle: 3.6 m/s²
– Handlebar: 4.8 m/s²
The sound and vibration levels indicated were
measured according to a standardized test
method and can be used as a basis for compar‐
ing electric power tools. The actual sound and
vibration levels may vary from the values indica‐
ted, depending on the type of application. The
sound and vibration levels indicated can be used
for an initial estimate of the sound and vibration
stress. The actual sound and vibration stress has
to be estimated. The times can be taken into
account in the estimate when the electric power
21 Specifications
measured according
pA
measured as specified
wA
measured according
pA
measured according to
wA
measured according
pA
measured according to
wA
0458-024-9801-A