English
– Never switch the hand blender
on when you are cleaning
it, connecting or disconnect
ing its attachments or when
replacing parts or accessories.
Keep your fingers away from
the buttons to prevent the
appliance from switching on
accidentally. Never touch the
blades on the attachments, as
these are very sharp.
– Food may splash out of the
cup during processing. For this
reason, allow hot food to cool
before processing to avoid
scalding.
– If using the hand blender in a
saucepan, remove the sauce
pan from the hot plate before
processing.
Overview of LED display (6)
LEDs
Hand
off
blender in
LEDs flash in sequence from left to
charging
right
station
All LEDs flash simultaneously
Hand
1, 2, 3 or 4 LEDs light up
blender not
in charging
LED 1 flashes slowly (1 s on/1 s off)
station
LED 1 flashes rapidly (0.1 s on/1 s off)
All 4 LEDs flash slowly (1 s on/1 s off)
12
– Ensure that the slot on the
attachment you are using is
sitting squarely and firmly on
the drive shaft pin. If attach
ments are loose or not firmly
attached to the pin, they must
not be used and must be
replaced.
Risk of explosion
– Protect the battery from
exposure to heat and fire.
Description
Battery fully charged
Battery is charging; the last LED to flash indicates
the current battery level
Operator error
(appliance is switched on in charging station)
Appliance is in use; number of LEDs indicates the
current battery level
Battery is dead
Battery is defective
(see „CHANGING THE BATTERY")
Overload protection (see „FUNCTIONS")