ES
4. ASSEMBLY
Unpack the product and
lift the vertical posts in the
direction of the arrow A.
M6*14
To fold the product after use,
loosen the M10 knobs on both
sides of the vertical posts,
afterwards lift the machine in
the direction of the arrow D
until it' s in a vertical position.
13
Step 1
M10 Knob
Step 3
Step 2
Attach the vertical posts with 2
M10 knobs on both sides.
Use a 6 mm wrench to fix the tray
holder with two M6x14 screws in
the position shown in the picture.
c
Step 4
In order for the moving wheel to
be visible, the belt must be in a
vertical position, as shown in the
picture on the left (position F).