Oven Timer Operation - Teka HLB SC Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1

OVEN TIMER OPERATION

Programming the Buzzer
1. Touch
or
display starts flashing, then press
indication '00:00' will appear on the display.
2. Select the time after which you want the
alarm to sound by pressing
will hear 2 beeps to confirm that the time has
been set and the clock will start counting
down from the selected time. The
bol will flash slowly.
3. Once the time has expired, an acoustic sig-
nal will sound for 90 seconds and the
symbol will flash quickly.
NOTE
With the Buzzer function, the oven will not
turn off when the time expires.
4. Touch any key to stop the alarm. The
symbol will then disappear.
If you wish to modify the time on the buzzer, re-
peat the steps shown. Upon entering the timer
control, the time currently remaining will appear,
which you will be able to adjust.
NOTE
With the Buzzer function, the remaining time
will show permanently on the display. With
this programmed function, it is not possible
to view the time or the total programmed
cooking time.
Programming Cooking Time
1. Touch
or
display starts flashing, then press
indication '00:00' will appear on the display.
2. Select the time after which you want the
alarm to sound by pressing
will hear 2 beeps to confirm that the time has
been set and the clock will start counting
32
User's Guide
until the
symbol on the
or
until the
symbol on the
or
down from the selected time.The
bol will flash slowly.
3. Select a function and a cooking temperature
using the oven commands.
. The
4. Once the cooking time is up, the oven will
turn off, an alarm will sound and the
symbol will flash quickly.
. You
5. Touch any key to stop the alarm and turn off
the
sym-
6. Set the controls to the
the oven.
You can change the remaining cooking time at
any time by touching
symbol starts to flash quickly. Now press
change the time.
NOTE
With the Cooking Time function, the remain-
ing time will show permanently on the dis-
play. You cannot see the current time on the
display when this function is set.
Programming the Cooking Stop Time
1. Touch
display starts to flash and press
see the current time on the timer display.
2. Select the time after which you want the
alarm to sound by pressing
will hear 2 beeps to confirm that the time has
been set and the clock will start counting
down from the selected time. The
bol will flash slowly.
3. Select a cooking function and temperature.
4. When the cycle is finished, the oven will turn
itself off, a buzzer will sound and
will flash quickly.
. The
5. Touch any sensor to stop the alarm and to
turn off the
on again.
. You
6. Set the controls to the
the oven.
symbol. The oven will switch on again.
position to turn off
or
or
until the
, symbol. The oven will switch
position to turn off
sym-
until the
to
symbol on the
. You will
or
. You
sym-
symbol
Tabla de contenido
loading

Tabla de contenido