Gb Operating Instructions; Inserting And Replacing The Batteries - Ruwido s 2 universal Manual De Instrucciones

All manuals and user guides at all-guides.com
OPERATING INSTRUCTIONS
GB
ruwido s_2 universal remote control
We congratulate you on the purchase of a ruwido universal remote control. Your new
remote control replaces the original remote control of your TV set and the remote
control of your satellite receiver or DVB-T (Freeview)/cable box (referred to below as
STB). Read all instructions carefully and retain the instructions for reference at a later
date. Further information and additional instructions can be obtained at www.
ruwido-consumer.com. If you have any questions you can call us on the ruwido
information line 00800 31133113 at any time.
You can program your remote control using the operating instructions and the
associated code and brand list, via the following methods:
a) By manual programming, by entering a four digit code from the code list,
b) By automatic programming, depending on the brand, by entering the three digit
code from the brand list
c) Or by automatic searching.
We recommend starting by using the manual programming method (a).
Operating mode TV and TV+STB
Your new s_2 remote control has two different operating modes.
This allows you to operate both the digital tuner (DVB-T/S/C) integrated in the set and
also external satellite receivers or a DVB-T/Cable Box (STB).
In the fi rst operating mode pre-set on delivery (TV) all keys on the s_2 remote control
operate the TV set.
When you program a STB code (whether manually or automatically by searching),
your s_2 remote control switches to the second operating mode (TV+STB). In this
operating mode, only the TV-Standby (
the other keys operate the satellite receiver or the DVB-T/Cable Box (STB).
Switching between TV and STB is no longer necessary when using your new s_2
remote control.
If you want to return to the fi rst operating mode (TV) after programming the STB, you
need to fully reset the remote control. See function "Deleting settings (reset)".

Inserting and replacing the batteries

Your s_2 remote control is powered by two 1.5 Volt alkaline batteries (AAA / LR 03).
Insert the batteries in accordance with the markings on the battery compartment.
Please take extra care to ensure correct polarity. Dispose of the old batteries in
accordance with local regulations.
Note :
Your s_2 has an internal memory to make sure that the programming is retained
after changing the batteries.
We recommend that you always use new batteries. Never combine old and new
batteries because the performance of your remote control and the service life of the
batteries will be negatively affected.
BA s_2 Universal, Innenteil, 105x210 mm CS4.indd 10 BA s_2 Universal, Innenteil, 105x210 mm CS4.indd 10
) and AV ( ) keys operate the TV set. All
av
tv
10
11.06.2012 12:52:38 11.06.2012 12:52:38