Smeg HMF01 Manual De Uso página 18

Problem
The motor works at a
lower speed than the set
one.
The motor will not start.
The whisks stop rotating
and the flashing symbol
appears on the
display.
The accessories do not
fit into their seat.
If the problem cannot be solved or for other types of faults, contact the local after-sales
service.
The appliance complies with European directives 2014/35/EC, 2014/30/EC and 2009/125/EC.
The conformity according to EN60335 clause 11 was verified by using the following preparations:
A. Wire beaters: 5 egg whites. Short Operation Time: 2 mins and 20 seconds. Speed: 9;
B. Optimus beaters: 500 ml cream. Short Operation Time: 4 mins. Speed: 9;
C. Dough hooks: 900g flour + 648g water. Short Operation Time: 5 mins. Speed:9.
EN - 8
What To Do If.....
Possible causes
The dough in the bowl is
too thick.
The plug has not been
inserted.
The product has not been
activated.
The motor is damaged.
The product is equipped
with a protection device
that interrupts the operation
of the motor in case of
overload.
The place of insertion of
the accessory is not the
correct one.
Solution
Remove part of it to lighten it.
Insert the plug.
Activate the product by
pressing the ON/OFF
button.
Contact the service centre.
To reset it, turn off the
appliance, unplug the
product and let it cool for
at least 10 minutes. Then
reconnect the power supply
to the socket.
Respect the shape of the
accessory by coupling it with
its seat.